Kit Bolt Chevy

Front & Rear Sway Bar Hop Shock Spring Plates S10 Xtreme Sonoma Bolt On Kit Zq8

Front & Rear Sway Bar Hop Shock Spring Plates S10 Xtreme Sonoma Bolt On Kit Zq8

Front & Rear Sway Bar Hop Shock Spring Plates S10 Xtreme Sonoma Bolt On Kit Zq8
INCLUDING: FRONT AND REAR SWAY BARS, Hop Shock AXLE DAMPER AND REAR SPRING PERCHES/SHOCK RELOCATORS. The rear (23mm) bar comes complete with the correct length end links, better heavy duty frame brackets, all mounting bolts, clamps, and bushings to mount the bar to the rear end and frame. Is a complete bolt-on kit. The front thicker (33mm) sway bar comes complete with new thicker end links and new polyurethane bushings. The bars frame bushings are original.

The front is thicker than the stock non-zq8/xtreme performance package trucks found on most s10's and Sonoma's. Is also a complete bolt-on kit.

Chevy incorporated a Hop Shock on some V-6 manual/standard drive s10s. Its an obsolete option that people have discovered beneficial in all s10s. Included in this kit is an axle damper known in the S10 community as a hop shock. It is also a complete bolt on kit in the s10 style but you can weld on the axle bracket if you prefer. Also included in this kit is a set of heavier duty than the stock s10 rear axle spring and shock plates.

Not only are they better constructed they are also designed better than the stock s10 plates, in part by it using a nut and bolt along with moving the shocks back away from the axle about 3 inches from the stock location. This also gives more than ample room to work on and bolt on options to your axle like a Hop Shock You will get both left and right sides. GM part numbers Q991 and Q992. Central Florida is great for used parts because there is no need to salt the roads, but I painted them with good paint anyway so when you receive them they will be close to new looking.

Fitment for 81-04 S10 trucks and Sonoma's 2wd and some stock ride height 4wd. On trucks earlier than 97 you will have to drill the holes for the upper end link brackets for the rear bar.

Everything is a complete bolt-on kit. You use your U-bolts in mounting the spring/shock plates. The item "FRONT & REAR SWAY BAR HOP SHOCK SPRING PLATES S10 XTREME SONOMA BOLT ON KIT ZQ8" is in sale since Monday, February 29, 2016. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Sway Bars". The seller is "jimmy1000000" and is located in Lakeland, Florida. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.

  • Attachment Method: Bolt-On
  • Type: Kit
  • Position: Rear
  • Manufacturer Part Number: Does Not Apply
  • Included Hardware: Shock
  • Placement on Vehicle: Front
  • Brand: Chevrolet GM GMC General Motors Chevy
  • Fitment Type: Performance/Custom

Front & Rear Sway Bar Hop Shock Spring Plates S10 Xtreme Sonoma Bolt On Kit Zq8